Specifications
The tank container is intended for the transportation of liquid cargoes in bulk, including dangerous ones.
Характеристики
| Characteristic | Value |
| 1. UN guidance number | UN T11 |
| 2. Tank material | Low-alloy silicon-manganese grades of steel:
09Г2С, 17Г1С on DSTU 8804:2018; P355GH (1.0473), P355NH (1.0565), P355NL1 (1.0566), P355NL2 (1.1106) on EN 10028-2; Stainless steel grades: 03Х17Н14М3, 08Х17Н13М2Т, 08Х18Н10Т по ГОСТ 7350-77; 316L, 316Ti, 321 по ASTM 240-95 1.4404, 1.4571, 1.4541 on EN 10088-2:2005 (the material is determined by the customer) |
| 3.Maximum gross weight, kg | 32000-36000 |
| 4. Own weight of the container (tare), kg
(±2%) |
4800 – (low alloy steels)
3800 – (stainless steel) |
| 5. Tank capacity, l | 25296 |
| 6. Pressure and temperature | |
| 6.1. Maximum permissible pressure, MPa (bar) | 0,4 (4,0) |
| 6.2. Design pressure, MPa (bar) | 0,4 (4,0) |
| 6.3. Test pressure, MPa (bar) | 0,6 (6,0) |
| 6.4. The pressure at the beginning of the opening of the safety valve, (no more), MPa (bar) | 0,44 (4,4) |
| 6.5. Pressure of complete closure of the safety valve after activation (not less), MPa (bar) | 0,4 (4,0) |
| 6.6. Calculated external pressure, MPa (bar) | 0,03 (0,3) |
| 6.7. Pressure when testing the tank for density (not less), MPa (bar) | 0,1 (1,0) |
| 6.8.Estimated temperature, ˚С | +130 |
| 6.9. The maximum temperature of the transported cargo, ˚С | +130 |
| 6.10.Operating temperature range, ˚С | -40…+65 |
| 7. Internal diameter of the tank, mm | 2388 |
| 9. Overall dimensions, mm
- length - width - height |
60580-6 24380-5 25910-5 |
| 10. The distance between the centers of the holes of the corner fittings, mm
- along the length - in width |
5853±4,5 2259±4 |
| 11. The minimum wall thickness of the cylindrical part of the tank, mm | 4,2 |
| 12. Equivalent wall thickness of the cylindrical part of the tank, mm | 6,0 |
| 13. Minimum wall thickness of tank bottoms, mm | 5,7 |
| 14. Equivalent wall thickness of tank bottoms, mm | 6,0 |
| 15. Hatch with a cover, a cover and a reinforcing ring «Pelican» | Manlid Assembly Ø500mm 8 Points 4 Bar Low Profile Complete gasket Manlid Gasket Ø500mm ID=485mm 14x14 Square Type - FEP/Silico |
| 16. Safety valve «Pelican» | Safety Relief Valve Master Blaster 2½" BSP 4,40 Bar + 0,21 B в сборі з Weld-In Flange 2½" BSP Ø72,4/93/127x25 6xM10 PCD 105 ES – SS та Flange Gasket Ø75/90/90±4 - AFM/PTFE |
| 17. Product top pouring (draining) device (if installed) «Pelican» | Butterfly Valve Flymaster 3"/DN80 Flanged 2xØ14 PCD 168 ES /Flange Stub Pipe Adaptor DN80 4xØ18 PCD 160 ES / 6xØ14 PCD 1/Weld-In Flange Ø95,4/140/202x26 8xM16 PCD 160 ES - SS316L/Flange Gasket Ø95/130±3 – PTFE/Blind Flange Ø190x10,50 4xØ18mm PCD 160 ES Dished - SS316/Flange Gasket Ø89/130/142x±3mm - AFM/PTFE |
| 18. Connecting the air (gas) main
«Pelican» |
Ball Valve Airmaster 1½"/DN40 With 1½" BSP Outlet 4xØ11 PCD/ Weld-In Flange Ø32/57/126x22 4xM10 PCD 103,5 ES - SS316L/ Dustcap 1½" BSP - SS316 |
| 19. Bottom filling/draining device «Pelican» | Bottom Discharge Assembly Flowmaster Triple S 3"/DN80 45° Co/ Weld-In Flange Ø115/162/200x34 8xM12 PCD 178 ES Conical – SS/ Dustcap 3" BSP - SS316/ Flange Gasket Ø116/155/203x±3 8xØ14 PCD 178 ES - AFM/PTFE |
| 20. Manometer «Pelican» | Pressure Gauge 0-7 Bar ¼" BSP - SS316 Connection |
| 21.Thermometer «Pelican» | Temperature Gauge Analog
-40°C+160ºC Tube Dry |
| 22. Protection against static electricity | Protected |
| 23. Service life before write-off, years | Not more 20 |